|
|
Ford Duratec Engines and Parts Ending Soon
Browse the latest Ford Duratec Engines and Parts offered for sale on eBay
Ford Duratec 2.0 Bottom End Engine Short Motor Mk1 Mk2 Escort Raceline |  | Hi there and welcome to this listing for my Ford Duratec 2.0 Bottom End.This was going in my Mk1 Escort project but going down a different route now. It’s standard 2.0 but does have ARP cap bolts and a breather blank fitted. Excuse the yellow paint, intended to paint it black but not got around it. I’ll be listing the head, dry sump, cams and a few other bits over the next day or two, would be up for a deal on everything. Cash on collection from Farnham Surrey. Could maybe get it couriered but please send me your postcode for a price before you buy or offer. See my other itemsGood luck and thanks for looking
£200.00 Buying Options: Buy It Now or Make an offer
|
Ford Duratec 2.0 Cylinder Head Mk1 Mk2 Escort Raceline |  | Hi there and welcome to this listing for my Ford Duratec 2.0 Cylinder HeadThis was going in my Mk1 Escort project but going down a different route now. It’s standard 2.0 Injector ports have been blanked off for carbs. Excuse the yellow paint, intended to paint it black but not got around it. I’ll be listing the bottom end, dry sump, cams and a few other bits over the next day or two, would be up for a deal on everything. Cash on collection from Farnham Surrey. Could maybe get it couriered but please send me your postcode for a price before you buy or offer. See my other itemsGood luck and thanks for looking
£100.00 Buying Options: Buy It Now or Make an offer
|
Duratec turbo supercharged forged st150 engine rwd |  | 2.0 duratec with +0.5mm overbore 8.8cr Wiseco forged pistons and K1 h beam rods. Less than a few hundred miles since rebuilt. Has since been stripped and fitted with new timing sprockets and chain, head gasket and arp crank and cam bolts. Hasn’t been run since as I’ve changed direction with tho project. It is the better hi port head and the head is basically standard form whereas the bottom end has a crank regrind and new bearings when it was rebored. Engine comes bare with no ancillaries and no sump. Collection only from Stoke on TrentAlso have a RWD custom alloy inlet manifold and turbo exhaust manifold available separately.
£1,150.00 Buying Options: Buy It Now or Make an offer
|
Ford Fiesta ST150 2.0 duratec reconditioned engine |  | Ford Fiesta ST150 2.0 Duratec Fully Reconditioned Engine N4JB engine code New pistons, rings, mains, ends, gaskets and seals, oil pump, head and block pressure tested and skimmed, valves recut and lapped in 90 day warranty Warranty covers parts only, in the event of any problem engine will need to be returned for inspection This engine was built with 35 years experience in building engines The engine is sold on an exchange basis, outright price is £1400
£1,100.00 Buying Options: Buy It Now
|
Ford Duratec Twin 40 45 DCOE Inlet Manifold Titan Raceline Mk1 Mk2 Escort |  | Hi there and welcome to this listing for my Ford Duratec inlet manifold to suit twin 40/45 DCOE Webers . Brand new, never fitted. It’s 80mm long, made by Titan. This was going in my Mk1 Escort project but going down a different route now. Cost over £200 new so grab a bargain. I’ll be listing the bottom end, dry sump, cams and a few other bits over the next day or two, would be up for a deal on everything. See my other itemsGood luck and thanks for looking
£175.00 Buying Options: Buy It Now or Make an offer £7.50 Postage |
Kent Cams Camshaft 2.0 Duratec KC DTEC10 Race Rally Verniers Mk1 Mk2 Escort |  | Hi there and welcome to this listing for a pair Kent Cams to suit 2.0 Ford Duratec Part/model number KC DTEC10 The last photo is from the Burton catalogue and shows the duration and lift etc. Includes Verniers, Followers, Valve Springs (not shown) and Timing ChainWas all going in my Escort but gone Cosworth YB instead so no longer needed. Cost well over £600 new so grab a bargain. I also have a bottom end, head, inlet manifold, dry sump etc. Would do a deal on everything. See my other Items. Good luck and thanks for looking.
£500.00 Buying Options: Buy It Now or Make an offer £20.00 Postage |
DURATEC ROCKER COVER DECAL STICKER COMPATIBLE FOR FOCUS RS MK1 |  | FOCUS RS DURACTEC DECALCOLOUR: White/Red (Please message if you require a different colour)SIZE: 6” x 0.5" Duratec RS 1" x 2.5" Ford OvalPlease state colour when buying otherwise WHITE/RED will be sent.When clicking the BUY IT NOW, payment must be made straight away otherwise your order will be cancelled.Please report any items not received within 14 days for UK and 21 Days for Overseas, as anything later than this will not be refunded nor replaced. Thankyou
£3.50 Buying Options: Buy It Now FREE Postage |
Engine Timing Tool Kit Ford 1.6 TI-VCT 1.6 Duratec EcoBoost C-MAX, Fiesta, Focus |  | Ford 1.6 TI-VCT Engine Timing Tool Kit 1.6 Duratec EcoBoost C-MAX, Fiesta, Focus. Ford 1.6 EcoBoost Petrol (Sigma) Engine Codes: JQMA, JQMB, JTMA, IQJA, JQDA, JQDB, JTDA, JTDB, IQDA, IQDB, PNDA, XTDA, MUDA, JTJA, JTWA, JTWB, JTBA, JTBB, KGBA, JQGA.
£20.55 Buying Options: Buy It Now FREE Postage |
Ford Engine Crankshaft Pulley Holder 1.8, 2.0, 2.3 Duratec Fiesta Focus Mondeo |  | Injector Extractor Kits. Counter holds the crankshaft pulley while the pulley retaining bolt is loosened/tightened. Engine Timing Locking Kits. Engine Codes: AOBA, AOBC, AODA, AODB, AODE, AOWA, AOWB, B4184S8, B4184S11, B4204S3, B4204S4, CDBB, CGBA, CGBB, CHBA, CHBB, CJBA, CJBB, CSDA, CSDB, GZFA, GZFB, GZFC, N4JB, Q7DA, QQDA, QQDB, QQDC, SEBA, SEWA, SYDA, TBBA, TBBB, TBWA, TBWB.
£17.99 Buying Options: Buy It Now FREE Postage |
ford mondeo st200 2.5 v6 engine duratec 24 valve |  | ford mondeo st200 2.5 v6 engine duratec 24 valve. Great running engine. Its done 108k miles starts and runs fine. Other issues with the car forces it to be broke for parts. This item will be delivered on a pallet to uk mainland only unless you have spoken to me about other areas please. For anymore information please call 07880 333328 thanks
£549.99 Buying Options: Buy It Now £85.00 Postage |
Ford Duratec 2.5 Crate Engine, Brand New |  | These engines are standard fit in the Ford Fusion and Ranger for the US market among others. The 2.5 engine shares its design with the 2.0 Duratec HE found in our Fiesta ST150 and Mazda MX5 NC models among others and is therefore an almost direct swap.
£3,750.00 Buying Options: Buy It Now FREE Postage |
RWD Duratec turbo inlet plenum jenvey DanSt |  | RWD Duratec turbo supercharger inlet plenum jenvey DanSt. Rwd duratec custom made plenum setup by DanST with Jenvey sf60 throttle body included. Allows the use of forced induction on rwd Duratec conversions into the capri and escort and kit cars etcHas take offs for brake servo, blow off valve and map sensor etc fitted but they can easily be plugged if not required. Was made for me for my project but I’ve changed directions with itBrand new unusedCollection from Stoke on TrentAlso have 2 different turbo exhaust manifolds available
£720.00 Buying Options: Buy It Now or Make an offer
|
Duratec Remote Oil Filter Take Off Plate! Avoids RWD Engine Mounts!! |  | Remote oil filter take off adaptors for the Duratec engine. Made from CNC machined 6082T6 billet aluminium. The -10 fittings are moved further back to clear the mount. M18 to -10 fittings included, ready to accept your pipework, as well as the O-rings to seal the plate to the block.
£115.00 Buying Options: Buy It Now £10.00 Postage |
FORD Duratec Petrol Engine Timing Tool Locking Kit 1.25 to 2.3 16v US PRO TOOLS |  | For Duratec petrol engines. Covers the complete Duratec range from 1.25L to 2.3L 16v. 1.25 16v Belt: DHA, DHB, DHC, DHD, DHE, DHF, DHG, F8JA, F8JB, FUJA, FUJB, M7JA, M7JB, SNJA, SNJB, STJA, STJB. 1.4 16v Belt: ASDA, ASDB, FHA, FHB, FHD, FHF, FXDA, FXDB, FXDC, FXDD, FXJA, FXJB, FXJC, RTJA, RTJB, SPJA, SPJC, UTJA.
£10.95 Buying Options: Buy It Now FREE Postage |
Duratec MZR MX5 nc turbo manifold ST150 Rwd Ford |  | Duratec turbo exhaust manifold by SPA Turbos. Brand new but has light surface rust from storage. Was imported from America to aid fitment in a rear wheel drive setup but will fit other setups requiring a top mount turbo such as the mk3 mx5Collection from Stoke on Trent
£250.00 Buying Options: Buy It Now or Make an offer £20.00 Postage |
Engine Timing Tool Fit Ford 1.6 TI-VCT 1.6 Duratec EcoBoost C-MAX, Fiesta, Focus |  | Ford 1.6 TI-VCT Engine Timing Tool Kit 1.6 Duratec EcoBoost C-MAX, Fiesta, Focus. Camshaft, crankshaft and flywheel pins. Ford 1.6 EcoBoost Petrol (Sigma) Engine Codes: JQMA, JQMB, JTMA, IQJA, JQDA, JQDB, JTDA, JTDB, IQDA, IQDB, PNDA, XTDA, MUDA, JTJA, JTWA, JTWB, JTBA, JTBB, KGBA, JQGA.
£19.99 Buying Options: Buy It Now or Make an offer FREE Postage |
|
|
|
|