|
General Build Chat Area for general build chat, questions, tips, tricks and progress |
19th August 2011, 19:42
|
Member
|
|
Join Date: Aug 2009
Location: essex
Posts: 66
|
|
iva queries
hi guys, few problems ive got with my iva forms,i need some advice on, 1, what are the design weights of the vehicle,i dont no these are they relevant to me as a amateur builder,2 vehicle make and model,im building a banham porsche speedster,using rover 114 floorpan chassis and all that running gear, do i put its a rover 114, or a porsche speedster banham,3im using the same warning lamp for both my handbrake light and also the fluid low warning, is this ok for the iva,cheers for any advice
|
19th August 2011, 20:09
|
|
Senior Member
Enthusiast
|
|
Join Date: Nov 2007
Location: Somerset
Posts: 232
|
|
1, what are the design weights of the vehicle,i dont no these are they relevant to me as a amateur builder,
Yes you need the weights, the braking efficiency is calculated on the weight. The weight must be the actual weight they read on their equipment or greater or it will fail. There is a calculation formulae in the IVA manual and relates to front axle and rear axle weights and weight distribution based on driver seating. Best idea is visit a weight machine TrackDevelopments have one and know the formulae used by the inspectors.
2 vehicle make and model,im building a banham porsche speedster,using rover 114 floorpan chassis and all that running gear, do i put its a rover 114, or a porsche speedster banham,
What you put on the form is what you want on the V5, so its Manufacturer is 'Bantam' and the Model is 'porsche speedster' in my book. Unless you want is called a Rover!
3im using the same warning lamp for both my handbrake light and also the fluid low warning, is this ok for the iva
Not sure on this one I have seen it talked over in other threads, my belief is its ok but please check. The IVA test centre are normally very helpful and will answer any questions you have if you call them, make it in the afternoon as they test in the mornings.
|
19th August 2011, 21:35
|
|
Senior Member
Enthusiast
|
|
Join Date: Sep 2005
Location: Northampton, UK
Posts: 1,891
|
|
Quote:
Originally Posted by eaa53
3im using the same warning lamp for both my handbrake light and also the fluid low warning, is this ok for the iva
Not sure on this one I have seen it talked over in other threads, my belief is its ok but please check. The IVA test centre are normally very helpful and will answer any questions you have if you call them, make it in the afternoon as they test in the mornings.
|
Worked for me - my fluid and handbrake used the same light, and I had no problems at IVA with it.
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT +0. The time now is 05:01.
|