Hi Graham,
Using the Mondeo harness will be a good start, I suggest when you strip it from the car that you label all the connections, then slowly untape the loom and remove all the cables you wont need, for example rear electric windows etc..
It would be worth getting yourself a copy of the Ford TIS cd from ebay, this has all of the ford wiring diagrams in it so that you can understand what does what.
There are different ways to approach the harness design, i've done two now, and have created separate body and engine harnesses, i've also used trailer cable to each corner of the car for the lighting as it made it a fairly neat way to have enough cores to each corner, as these are fitted to the chassis rather than the body.
Have you got much auto electrics experience?
|