Quote:
Originally Posted by Chris Cussen
Hi,
I fitted 4 point seatbelts with an inertia real that required a bracket to move the seatbelt mounting point forward from the rear chassis rail. I made the bracket and going for a belts and braces method put a 3/8 bolt through the rear chassis rail which went into a spreader plate on the underside.
My tame welder did a neat job despite being only and inch or so from the fuel tank. He used some heatproff shield to make sure none of the weld splattered onto the tank. Its fairly agricultural out here in Sommerset too.
|
Any pictures Chris? I was going to do the same and even got as far as buying the seat belts, but I found that the reels fouled on the rear tub. I still have the seat belts and, if your mod is simple, would like to retro-fit them. Static 4 point seatbelts are a pain at times....
Robin