New Tribute member

[fatbloke]

Have fun with the front end. I put one on a MK2 and had to remove quite a bit of the fibreglass around the engine bay to get it to fit. I then had to cut out the inner skin on the bonnet to get that to fit.

Might have just been me being cack handed though.

[306craig]

Originally Posted by fatbloke

Have fun with the front end. I put one on a MK2 and had to remove quite a bit of the fibreglass around the engine bay to get it to fit. I then had to cut out the inner skin on the bonnet to get that to fit.

Might have just been me being cack handed though.

Hmmmm, now I'm not feeling so confident. You wouldn't have a pic or 2 would you?

[Paul L]

Originally Posted by 306craig

...Getting really annoyed with working on the drive and being restricted by the weather!!!!!!

I know what you mean, covers off, covers on, cover off, covers on, has been the theme of my build this week too.

Still, it looks like you are making good progress.

Originally Posted by 306craig

… You wouldn't have a pic or 2 would you? …

There is a link to FatBloke's build thread towards the bottom of this post:

http://www.madabout-kitcars.com/foru...5&postcount=14

And links to some other MX250 builds in this one:

http://www.madabout-kitcars.com/foru...9&postcount=12

Hope that helps, Paul.

[Tribute Automotive]

Originally Posted by 306craig

Hmmmm, now I'm not feeling so confident. You wouldn't have a pic or 2 would you?

Your kit was trimmed to fit the Mk2 shell, so you should only need to do some minor fettling. Here's some pics of it fitted to our stripped out Mk2 shell. Please ignore the wheels in the arches, the shell is sat on top of a Spitfire chassis: