quick update spent most of the weekend removing the dash ready to fit the new one .there is a lot of work in making up the dash the old top under the window screen needs to cutting off the old one and be bonded onto the new one to keep the air vents. also the sides where the dash bolts onto the body also need cut off and bonded on.
this is a pic is not the best but its of the underside of the new dash with the old vent boneded on
20191013_153119.jpg
20191013_131104.jpg
trial fitting of new dash still loads to do i've filled the middle in with a bit of spare fiberglass
20191016_121748.jpg
I have taken a mould off the top so I can pad it and cover it in leather then stick it back on when the dash is covered. not pretty but it will do the job when its cut down
20191014_132239.jpg
this stuff is my savior setts in 5 to 10m mins expands setts like rock and can be sanded back what else do you need from a glue. just run out but 12 tubes on the way.
20190922_162935.jpg
bring on the weekend