Quote:
Originally Posted by Fibreglass
It is relatively easy to make a LHD chassis as 95%+ is the same as a RHD after all Ferrari designed the car as a LHD and just slightly modified it to be RHD. The centre spine is still offset to the right on both RHD and LHD. It just has a hump and dogleg on the RHD to allow a little extra foot space and clearance for the throttle linkage. I have moulds for the LHD front bulkhead so that would just leave the pedal box and steering column mountings to move over. Hope this helps. Thanks Mark
|
Indeed that's very helpful, thank you. Shall continue following your progress with interest.
Chris