[Grey V8 Pete]

I will be interested to hear your feedback. It’s a job that’s on my preventative maintenance list too and I also found the OE 22mm bore master cylinders are out of stock everywhere. I suspect that for those alternative parts the brake pipes may need re routing as the side bosses could be facing the outside of the car. Not a major problem, just a bit of extra work. Also worth checking that the bolt holes in the mounting flange are the same pitch or you will need to modify something there. Finally worth checking that the depth of the rear piston hole ( relative to the flange face) is the same as your existing one, to ensure that the servo plunger has the correct clearance to work correctly. Peter.