Wiper Assembly
Hi people,
Why oh why didn't I keep the wiper arm and blade from my donor? :eusa_doh: Does a Front Wiper Arm and Blade assembly from a P Reg 216 etc fit...or should I get a specific model arm and blade assembly? John MarlinTurbo |
wiper arm
Hi John,
i used rear wiper arm from 214 and a blade that cleaned largest area of screen without catching edges. Brian |
hi all
one area I was looking at was using the rear wiper arm off a non bubble back 200 but using the new type of flat wiper blade off modern passats and toyota's. I have been told they work very well with a curve screen with a single arm as theyadapt to the shape of the screen and wipe very well in both directions. all the best tony g |
Brian,
Thanks for the info, saw a 214 at the scrappies but the rear wiper arm had been removed...doh. I've just fitted a passenger side arm from a 420 gsi M Reg and that seems to fit well. NOTE, that the tapered splined holes vary in diameter between model years! HTH people. Cheers John MarlinTurbo |
All times are GMT +0. The time now is 01:45. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright Madabout Kitcars 2022