View Full Version : Wiper Assembly
marlinturbo
2nd September 2005, 08:33
Hi people,
Why oh why didn't I keep the wiper arm and blade from my donor? :eusa_doh:
Does a Front Wiper Arm and Blade assembly from a P Reg 216 etc fit...or should I get a specific model arm and blade assembly?
John
MarlinTurbo
holgate86
2nd September 2005, 20:45
Hi John,
i used rear wiper arm from 214 and a blade that cleaned largest area of screen without catching edges. Brian
tony-g
3rd September 2005, 09:48
hi all
one area I was looking at was using the rear wiper arm off a non bubble back 200 but using the new type of flat wiper blade off modern passats and toyota's. I have been told they work very well with a curve screen with a single arm as theyadapt to the shape of the screen and wipe very well in both directions.
all the best tony g
marlinturbo
7th September 2005, 09:07
Brian,
Thanks for the info, saw a 214 at the scrappies but the rear wiper arm had been removed...doh. I've just fitted a passenger side arm from a 420 gsi M Reg and that seems to fit well.
NOTE, that the tapered splined holes vary in diameter between model years!
HTH people.
Cheers
John
MarlinTurbo
vBulletin® v3.8.9, Copyright ©2000-2024, vBulletin Solutions, Inc.