Skip to main content

MadaboutKitcars

Build Stories are assembled automatically from a build thread's own author, in their own words and order — see all featured builds.

Scottie's Tribute A352 build

By Scottie22 · 1242 updates · Oct 2013 to Nov 2018

Read the full original thread (with everyone's replies) in the archive →

June 2015

12 Jun 2015, 4:51pm General Update
I had never thought of that one Derek, look forward to what ever you choose!

BSM, they are quite comfy, but have not done a long trip yet!
Time will tell, but they should be okay.
13 Jun 2015, 8:44am Engine
Thanks for the back-slapping fellahs!

I forgot to mention yesterday, that I took the car down to my local scrapyard, where much of the ally, stainless and bits and bobs came from, and put it on the weigh-bridge, as I was gagging to see how much weight I had saved.

Well, I was disappointed on that one! The Triumph given weight of a Spitfire MK IV is 720 kilos, and mine weighed in at 700.

So after all the heavy stuff had gone, I only saved 20 kilos!

Still, as the original had around 97 BHP per ton, and with the K and N and better exhaust, I would think I'd gained 5 or 6 BHP, so mine will be about 107 BHP per ton.
It is reasonably lively to drive, but the looks and noise does it every time!

P.S. A real one weighs in at 900 kilos so I'm lighter there!
13 Jun 2015, 11:06am General Update
Not really redratbyke!

You should know that scrapyard dealers are hard-nosed bastards
that are only impressed by cash notes!
13 Jun 2015, 12:00pm Mechanical Overhaul Chassis and Body
Thanks jonesy!

Deggsy, this post is for you, and anyone else building an A352:

When it comes to putting the body on the frame, the body has to be low enough to start with. After its on, only the chassis can be lowered, which may not be enough for that mean look.
This may not apply to you so much, as I know you are not using a Spitfire as a base.

I know some people do not like spacers and negative camber too much, but wheel bearings and tyres are easy to replace, and in my opinion, a price worth paying for the right look.

Also, the handling and ride are often improved by these mods.

The following pics show what I mean more than words:

[IMG][/IMG]

[IMG][/IMG]
14 Jun 2015, 7:03pm Engine Interior & Trim
Sunday

Well, I had intended to take my car to E Type day at Prescott hill, but somehow, it never worked out that way!

I was on my way to get some lead-addative stuff, just in case my re-con engine, (which came in the donar) had not been rebuilt with the right valves, and I drove past the fuel station, intending to fill up on the way back, as the fuel gauge was reading one quarter, when the engine spluttered, and I came to a halt, having run out of fuel!

Immediately an MX5 pulled up and offered help, it was a young lady, and I told her I needed fuel, so (love her) she said "petrol or diesel"?

I could imagine Sir William Lyons having a smile at that one, anyway she came back two minutes later with the petrol, and in it went, I paid and thanked her and I was off.

I always carry a gallon can of fuel in all my cars, but had not got round to doing it in this one yet.

On the way back I did fill up, and bunged in the lead stuff.

A friend came round to inspect the car, and told me he could smell petrol,
to cut a long story short, a small 4 inch bit of rubber fuel line (which had looked sort of new) had gone a bit spongy, and by the time I had jacked up the car and replaced it all, it was too late to go to bloody E Type day!

Anyhow I did go for a really good drive around, and that did put a smile on my face.

I did not take any pics, but promise I will shortly.
15 Jun 2015, 8:07pm Engine
Monday

Well, today I drove the car all over Hereford looking for every speed bump that I knew of, and believe me there are a lot.

I successfully got over every single one, of course I had to slow down, and the grand-daddy of them all, was the one at Aldi's!

I thought I could never ever go shopping there in the car, but HAD to try, I cheated a bit, as coming out of the car park, I went over the bump a bit on the diagonal, which of course flattens it out quite a lot.

So there we go, I have so far covered over 200 miles, and all the Heath-Robinson things I have put on the car seem to all work well, including the "header tank" abortion, its been very warm, and the car has not boiled over yet!

The exhaust system is also working well at the moment, which please me.

There were a lot of doubters about that too!

There have been lots of admiring looks and comments, and so far NO ONE has asked me if its a kit-car, which really pleased me.

One chap asked me how old the car was, so my distressed-look efforts were not wasted!

The most frequent question is "Is it an E Type?" and "is it a Jaguar?"

Of course its smothered in Jag badges and Jag bits, but they still ask.

And just about everyone says "really love the colour" So that was worth it too.


I took it out in the country and took some pics:

I suppose I have to take the advice I have been given and start a "Scottie on the road thread"

Here are the pics I took today:

[IMG][/IMG]

[IMG][/IMG]

[IMG][/IMG

[IMG][/IMG]

[IMG][/IMG]

[IMG][/IMG]

[IMG][/IMG]

[IMG][/IMG]
15 Jun 2015, 9:11pm General Update
Certainly does Ed!
I've never even sat in an XKSS, never mind driven one, but roaring round the country lanes in mine has to be the next best thing!
It really feels like the real deal!
16 Jun 2015, 8:40pm Mechanical Overhaul Chassis and Body Interior & Trim
The saga drags on...........

I was adjusting the carbs today, and my driveway slopes quite steeply downwards to the main road, and I had not put the handbrake on hard enough, and, while under the bonnet, the car starts to move down the drive, heading towards a rocky bank, I had instant visions of a crumpled nose and smashed light etc!

I had to do something bloody quick, so I dived over the side-screen, and wrenched the handbrake on fully, which stopped the car just short of major damage!

I was not so lucky, in the rugby dive, I badly cut my hand on god-knows-what, and worse still broke a rib because the side window did not give at all, and nothing broke except the rib!

The cockpit was covered in blood, and I was well pissed-off.

So I know the door/hinge/window etc are very strong to have taken my complete weight and been undamaged.

Anyhow, life goes on, and I spent the rest of the day in an absolute orgy of roaring about all over the place just having fun fun fun!

The most asked question today was, "is it real or a replica?"

Things like that make all the work worth while I suppose.

Before I went out, I did a "Steve McQueen ", and removed the side screens. I found the car was more pleasant to drive without them, it seemed to give the driver more freedom, and there was no buffeting at all, the windscreen seems to deflect the airflow very well in that respect.

I may well put them back on in the Autumn.
(Without the screens, it is easier to get in and out of too.)
17 Jun 2015, 10:07am Mechanical Overhaul
Lucky@LM, thanks for that, I'll try and make the effort!

Rene, I thought taking the side screens off would please you!

Swifty, I've just been out and measured it, the clearance under the "chin" in 6 inches, (150mm) and just a little further back under there is the anti roll bar thing, and the mounting bracket is the lowest point on the car, at just over 3 inches from the ground.
Hope that helps!

[IMG][/IMG]
18 Jun 2015, 8:58pm Engine Mechanical Overhaul Chassis and Body
Had a good day today,

I spotted a mint looking Jaguar XK120 ahead of me , and waved him down so I could look at his car, he stopped and we oohed and ahhhed at each others cars, and it turns out he restores these cars and will give me a guided tour of his workshop if I follow him home.

The car was a customers car, and he had just been to lunch in it with his wife.

He wanted to know what engine I had under the bonnet, and I would not tell him, so he said "we'll see" and set off as fast as he could go, well, I gave chase and kept up with him, and he couldn't shake me off.

It was nice to know that my car was as fast as a genuine Jaguar XK120 with a 3.4 liter engine in it!

A point not lost on him I might add!

He had a vast barn-type building with dozens of old Jaguars, XK 120's 140's and 150's, Bentleys. E Types, and all sorts of lovely cars.

His mechanic remarked about the nice engine note my car had, and the owner said "that's nothing, you want to hear it when he opens it up"!

At that point I told him it was only a Triumph 1500, and drove off
with as much wheel-spin and gusto as I could manage.

I made a point of trying to remember to take a camera out with me in future.
18 Jun 2015, 9:21pm General Update
A friend took a short video when I drove off from a visit today, I have successfully loaded it up to photo bucket, and it plays okay.

Can anyone give me a step by step of how to link it to my thread please?
18 Jun 2015, 9:43pm General Update
I'm not sure how to do that Ed.
Oh, and I don't think anyone takes notice of- What was his name again?
18 Jun 2015, 10:23pm Getting Underway
Okay Mr Towed, here goes:

[IMG][/IMG]

This is the link to the video, you may have to play about a bit, but it did work on PB.

Click on the pic

P.S Turn the sound up loud!
18 Jun 2015, 11:37pm Engine
Lucky@LM, it will sound like that if you get the exhaust system right!
Mine is all hand made and stainless steel, which usually gives a good resonant sound.
I sometimes have to play about a bit to get the right noise, but this time, it came out right first time, I was lucky.

And 8 V Ed, you are spot on about the weight, my car is just under half of the XK120 weight so has a similar BHP per ton power, but being so much lighter will accelerate to speed faster.
19 Jun 2015, 8:02am General Update
Mr T!
When talking about wavy grey hair, you do realise you are skating on thin ice!
20 Jun 2015, 7:48am General Update
Saturday

Thank you for your posts Mr Towed!

On the subject of Mr Towed, here is a rare pic of him, having fun at the sea-front on his rented jet ski............


[IMG][/IMG]
20 Jun 2015, 8:13am General Update
I do have some before pics Paul, I'll dig some out!
22 Jun 2015, 8:22pm Electrics
Monday

Monday was Van-day.

Not strictly Tribute related, but I know several people have expressed interest
in this project, so here we are.

I stripped the van front off today, and the lights and indicators, and had a trial-fit of the "new" font.

I needed to extend the wiring a bit as the new headlights are a lot lower than Daihatsu intended them to be.

I was disappointed at the fit round the sides, but not overly so.

I fitted in on with loads of self-tappers to a good sound fit, then took the front off, roughed it up a bit, and Sika-flexed it back on permanently.
I will take out the screws tomorrow and feather the edges and fill it.

It will look very cute when finished!

[IMG][/IMG]

[IMG][/IMG]

[IMG][/IMG]

April 2016

12 Apr 2016, 10:28pm General Update
Thanks for that CP.

I suppose Jaguar will will go ahead and build the 9 new XKSS's just as they went ahead and built the lightweight E Types, and charge millions for them too.

BUT, the owner of Goodwood probably will not allow the new XKSS's to race there either, as he banned the E Types, saying they are not ORIGINAL cars, as they were built with 2015 metal and components, not 1960's metal and components, which makes them in his words: just replicas, NOT original cars.
And he will only allow ORIGINAL cars to race at Goodwood.


Now then, the XKSS I built is also a replica, but the main difference between mine and the new Jaguar cars will be the fact
that my car cost around 1 million pounds LESS to build!!
But it won't look much different to what they will buy.
Eat your heart out potential rich new XKSS customers!!

[IMG][/IMG]
13 Apr 2016, 12:52pm Electrics
At LEAST 3 or 400 quid Mick!

That's an older pic CP, the dash is in bits at the moment, but I have fixed all of the electrical problems, must get it back together soon!