Anyone got any tips on ali welding??
Tried today and found it very hard, adjusting everthing but still no luck
Cheers
Craig
17 Oct 2007, 5:39pm
Ali welding
17 Oct 2007, 9:33pm
Quite a long article in the knowledge base section
http://www.madabout-kitcars.com/kitcar/kb.php?aid=125
has a small section on aluminium welding, don't know if it will be of any use.
Never done it myself before but is one of those things I'd like to master one day.
John
http://www.madabout-kitcars.com/kitcar/kb.php?aid=125
has a small section on aluminium welding, don't know if it will be of any use.
Never done it myself before but is one of those things I'd like to master one day.
John
13 Nov 2008, 9:48pm
If you are welding brackets or ali bodywork together then give Lumiweld a try. The kit is available from [url]www.frost.co.uk[/url] (welding) and it's very good.
I have welded stuff together with success, even a bracket to an ally heat shield on a Caterham in race trim and it's still Ok after many many track miles.
Highly recomended kit and all you need is a blowlamp.
I have welded stuff together with success, even a bracket to an ally heat shield on a Caterham in race trim and it's still Ok after many many track miles.
Highly recomended kit and all you need is a blowlamp.