MadaboutKitcars

Someone, please.

I really need a source for the aforementioned 6mm trim.

Try a pm to Kidge re his 275?

pretty sure that's Scimitar guttering .....

WILCO

Thanks..

PM sent , Geoff .

I do have a couple of lengths of Scimitar guttering in the workshop , but not sure how to ship them as they are quite long ...but can look into it if you need it ...

I'll dwell on that. Appreciate the offer. I really thought it was a simple "J"
shaped extrusion like the attached pic.

Best!

Jack

CBS over here can supply black j profile so I am sure you must have a supplier over your side of the pond

Get googling :-)

I think Lidge used the J strip. It is after last summer's Tribute meet iirc correctly

googling away...

Ha ha

Or as a work colleague says GTS ‘google that shit!’

"GTS" it is!

6mm aluminum trim for coupe above the window frames.

got mine from wilco's as someone else suggested comes in 2 mtre
length

Thank you!

Need some advise.

Fuel fill dilemma

I have a Cobra style flip top cap recessed in top of rear fender like many have used. The fill used 2 inch ID hose.

How did you get from the Z3 filler tube to the cap?
Reducers and smaller fill hose?
Ultra flexible fill hose that CBS sells (which ID)?

I'm ready to cut up some exhaust tubing bends and make a weldment if necessary. Help please.

Have you read jagtvr's fitting for the relocated filler. Describes all the components required.

I have, many times. I want to locate the cap further forward on the fender
for a more direct fill. Again, some have done this before.

If you mean like the Kobras try the Tribute page on Facebook.

Don't do facebook!

I have just asked for a step by step guide with parts and suppliers. On the Facebook page.

appreciate that! Will stay tuned. I don't mind cutting away some sheet metal either. (no registration issues here in Florida).

Sorry but on holiday with limited internet. Before I left I spoke to the chap who has taken over nobodi, he is using a larger diameter flexible pipe that fits OVER the original filler and is then necked down to fit the filler cap. Looks like a good idea.

I sure would like to know the source of that flex pipe.

Thanks, much appreciated.

I know that Kent is not exactly handy for Florida, but Car Builder Solutions stock lots of fuel system parts (as well as lots of other goodies).

https://www.carbuildersolutions.com/en/fuel-system

SIMMO

I have made an inquiry this afternoon, thanks.
Nubodi also replied directly and was very helpful.