Skip to main content

MadaboutKitcars

This is a read-only archive of the old Madabout Kitcars forum. New posts and replies are no longer possible, but every thread is still here to browse and read.

N.Ireland Cobra build

14 Sep 2014, 5:47pm
Passed the MOT on Thursday so now road legal again. Had a nice spin in it yesterday and it certainly attracts attention!

Still jobs to do as I havent even got the inner boot panel fitted yet or inner wheel arches. Have to sand and compound the paintwork yet as well to leave a real sheen to the paintwork. Oh yes, have to fit lowering springs to probably just the front.





14 Sep 2014, 6:58pm
If i were you, I'd try fitting bigger tyres 1st before loosing the driving comfort of the BMW suspension.
14 Sep 2014, 7:01pm
Understand where you're coming from but the cobra front is sitting higher than the original z3 panels were plus I already have a set of eibach springs to fit so will change just the front and when the rear tyres are due a change go for bulkier rubber there perhaps.
17 Nov 2014, 11:16am
Hi Blue,

I am giving in to the amount of people asking if someone stole my grill, as you already have the experience of fitting, any chance you could let me know how you attached yours please?
A photo would be great.
Any new photos of your car with the suspension lowered?

Thanks in advance,

Lumpy.
17 Nov 2014, 1:19pm
Hi Lumpy, will try to get fresh pics of it as soon as i get the chance but the dark evenings may stop me from getting any til the weekend now.

I just attached the grill using polyeurethane adhesive (tiger seal is the same stuff I think) just held the mesh in place with tape and then used blobs of the adhesive every 10-15 cm around the parameter. If I every need to remove the grill it should pull off without breaking the mesh but I shouldn't ever have to take it off.

I toyed with the idea of sticking in threaded rods and using washers and bolts to hold in the mesh but was just getting too complicated to get the all in place and measured correctly.
25 Nov 2014, 9:10pm
Suspension lowered 30mm on Eibach springs at the front only.




Grills cut out of ABS sheeting from Ebay and stuck in with blobs of polyurethane adhesive (not as permanent as it sounds but it is pretty solid!)



14 Dec 2014, 3:12pm
A few pictures from a photoshoot yesterday using my Kobra (not for commercial usage)









14 Dec 2014, 8:42pm
Nice, the one-from-last is just great.
23 Feb 2015, 11:31pm
update

Hi i live in NI too was wondering if it would be possible to see the car once done as im very interested in building a kit myself. will you be going to any shows in ni?
where abouts are you based?
23 Feb 2015, 11:36pm
Hi there. I'm based in the Cookstown/Magherafelt area and would be happy to meet up some day to show you the car. Do you know of any shows coming up by the way? Where are you based?
24 Feb 2015, 10:49am
I think there is a car show in Ballymena which is usually pretty big. I'm based in Portglenone so not too far away. i could give you a shout next time im on annual leave?
28 Mar 2016, 4:06pm
In the spirit of Grand Designs revisited how has it been living with the Kobra over the winter?

Would be great to get an update if possible

Dave
5 Apr 2016, 8:19pm
Not really much to update on to be honest! :eusa_angel:

Only recently got around to installing the hardtop after wrapping it in matt black vinyl. It fits but its too tight on top of the new bulging rear arches so I'll need to trim them a bit (but not much).

I intend respraying the car a rich blue metallic as I cant really settle with the Burnt Orange - it just looks too dull most of the year round.

The car itself is spot on. Easy to live with and everything working as it should. :) Turns heads everywhere it goes. Went to one of the largest shows in N.Ireland last year and 3 guys who were marshalling saw every car coming in and made a point of tracking mine down as it was the only one they couldn't work out what it was. :laugh: They loved it!
5 Apr 2016, 8:32pm
Thanks very much for letting me/us know. I like to see what happens longer term as it adds an extra dimension. Not only building but then living with the results.

Thanks again

Dave
8 Apr 2016, 9:49am
N.Ireland Cobra build

blueface wrote:
Hi there. I'm based in the Cookstown/Magherafelt area and would be happy to meet up some day to show you the car. Do you know of any shows coming up by the way? Where are you based?


Hi mate, I am in Belfast and have just started an MX250. You mind if i hassle you with questions? Nice looking Kobra.
8 Apr 2016, 11:04am
Hi there,

I'll certainly help if I can. Ask away!
29 Mar 2018, 9:16am
Hi blueface beautiful job on the kobra. Is that silver or black ABS sheeting?
29 Mar 2018, 11:22am
Its black abs sheeting - but I've remodelled it using stainless steel sheeting instead. Must see if I can post a recent pic......
29 Mar 2018, 11:33am




The burnt orange wasn't vibrant enough unless the sun was blazing down on it so went for a VERY metallic blue which really zings in the sun but still looks rich on dull days.
29 Mar 2018, 11:42am
Abs sheeting

Thanks blueface
What should I put into Ebay to find the stainless steel version
29 Mar 2018, 4:38pm
Abs sheeting

The new colour is great What blue is it?
29 Mar 2018, 5:45pm
Just got it off eBay as a special mix. Think they called it Atlantic blue sparkle. They described it as having as much metallic content as they could get away with!
29 Mar 2018, 5:56pm
Found the paint thanks blueface. Sorry for so many questions but I think your Kobra is the best I've seen and I've seen lots of them in the last six months while researching for my build. What wheels and tyres do you have on the car? I promise last question today lol
30 Mar 2018, 7:36am
Blimey. That is a popping blue ! Good work.

Earlier in the thread I see the wheels are Dotz Fast Sevens 17 inch diameter.

Looking good that Kobra. Must turn heads :icon_lol:

Dave