Car owner feedback for Bulldog
I have re-built my Bulldog (2006) It is extremmely easy to work on and the parts are freely available. Being based on Cortina parts, if you have a 17mm a 13 mm and a 14mm spanner you just have about a full tool kit!
Owner Cornish John has added that it took 150 hours over 9 months to build at a cost of £1,500.
Mk2 Built in 1986 on Marina 1300 base therefore NOT SVA tested. Originally built to standard unmodified spec, but now has unleaded big valve gas flowed head, LCB big bore s/s exhaust, Kent performance cam, oil cooler, electric fan, 1 3/4' SU carb on performance manifold, dual braking system, uprated suspension.
Owner Ian Streatfield has added that it took 120 hours over 2 months to build at a cost of £2,500.
easy to build for first timer, build time reflects my lack of free time not difficulty of build!! Very pleased with finished product. No problems since completed.
Owner Robin Bass has added that it took 200 hours over 48 months to build at a cost of £5,000.
Mk.4 in BRG with tan roof, 1600 Pinto 4 speed, K&N alloys and filter, fully trimmed, wooden dashboard and s/wheel, 4 speaker digital r/cassette, green Cobra cub seats, stainless rollover bar and exhaust, spots, the only one in N.Ireland and envied wherever seen with a new MOT in Sept. 01, after 8 years dismantled.
Owner john bell has added that it took 100 hours over 6 months to build at a cost of £1,650.