Engine bay wiring.
H everyone.
I'm connecting everything up and nearly finished. I'm using the 4 relay box from a bubble (start relay,Oxygen sensor, Main relay).
I have the following wires left from the Marlin loom : Brown, Purple and blacks.
And the following from the relay box :
Two Brown/Slate
1) supply for ignition coil, stepper motor, ECU, injectors.
2) supply for Oxygen sensor and starter.
One Brown/White.
Supply for fuel pump relay.
Ones I've worked out are ( i think!)
Black's = earth to chassis.
Brown = Ignition switch +. Connected to battery via fuse. Which fuse rating for this??)
Purple = Permanent live. Connected to battery via fuse. Which fuse rating for this??)
The green (switch +)= I was going to use this to supply the 2 Brown/Slate's and Brown/white above. But was not sure if this is all too much for the green wire alone? Also which fuse for these??
Cheers
John
|