Are you madabout kit cars      
 "We've Got Kit Cars Covered" Information about Madabout-Kitcars.com Contact Madabout-Kitcars.com         Home of UK kit cars - madabout-kitcars.com Various kit car write ups All the latest kit car news Kit car related and general discussion

Search
Manufacturers
Kit Cars
Kit Car Data sheets
Picture Gallery
SVA Knowledgebase
Clubs & Communities
Build cost estimator
Kit cars for sale
Knowledge Base 
KitcarUSA.com
Classic-Kitcars.com
 

Go Back   Madabout Kitcars Forum > Mad Build Area > Marlin 5exi builds

Marlin 5exi builds Calling all you sexi builders....sorry 5exi builders, show us your progress.

Reply
 
Thread Tools Display Modes
  #1  
Old 4th May 2010, 19:26
craig's Avatar
craig craig is offline
Senior Member
Enthusiast
 
Join Date: Nov 2005
Location: Tyne and wear
Posts: 784
craig is on a distinguished road
Default Brighter angel eye led rings?

I am wanting to make my led rings brighter so they can be seen in daylight!

Does anyone know a way of doing this?

Inside there is what looks like two 3mm leds in each ring in the shape of a T
with a resistor on each one which I presume brings it down from 12v to about 3v??

If I replace the leds with 12v 3mm ultra bright ones and bin the resistor will it just blow?

Ideas please

Craig
Reply With Quote
Available from eBay
  #2  
Old 5th May 2010, 08:48
Chris Cussen's Avatar
Chris Cussen Chris Cussen is offline
Senior Member
 
Join Date: Apr 2009
Location: Somerset
Posts: 518
Chris Cussen is on a distinguished road
Default

Yes.

You cold make them brighter by replacing the resistor with one a smaller the value of the one there, but at the risk of blowing the LEDS. This link will enable you to decode the colour code on the resistor http://en.wikipedia.org/wiki/Resistor_color_code

If you replace the LEDS then you need to calculate the current required to flow through each LED, which you will have to get from the data sheet for the LED.

You will then need to caclulate the value of the resistor to give you the required current

The general formula is R = V/I
where R is the resistor value (ohms)
V is the voltage (Volts)
and I is the current (amps)

So if the current required is, say 5mA (0.005 Amps) and you have a 12 volts supply then the resitors value would be 12/0.005 = 2400 ohms. The nearest resistor values would be either 2200 or 2700 ohms.
2200 ohms will give you a brighter result as marginally more current will go through the LED

You will have to make sure the resistor is rated correctly for the power dissipation. The power dissipated is given by the formula W=V*I where W= Watts
In the example above the power is 0.005 * 12 = 0.06 watts, so an off the shelf 1/4 resistor would be fine, however if the current required is 1 amp then you would need a 12Watt resistor, and thats a fairly meaty item.
Reply With Quote
  #3  
Old 5th May 2010, 17:21
craig's Avatar
craig craig is offline
Senior Member
Enthusiast
 
Join Date: Nov 2005
Location: Tyne and wear
Posts: 784
craig is on a distinguished road
Default

HChris thanks for detailed reply although it kinda makes me think I won't bother now! Ha!
What would happen if I just wired 12v leds without resistor but much brighter items?

Cheers
Craig
Reply With Quote
  #4  
Old 5th May 2010, 18:10
Chris Cussen's Avatar
Chris Cussen Chris Cussen is offline
Senior Member
 
Join Date: Apr 2009
Location: Somerset
Posts: 518
Chris Cussen is on a distinguished road
Default

More than likely the LEDS with blow. The resistor is there to keep the current through the LEDS to it's designed value without any resistor at all then PHUT!

You could always try a smaller value (say 75% the current value), but then you will risk blowing the LEDs
Reply With Quote
  #5  
Old 5th May 2010, 18:50
craig's Avatar
craig craig is offline
Senior Member
Enthusiast
 
Join Date: Nov 2005
Location: Tyne and wear
Posts: 784
craig is on a distinguished road
Default

Cheers I think I will try combo of both brighter led and lower resistor! Less are so cheap it can't hurt

Craig
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +0. The time now is 20:52.

copyright © madabout-kitcars.com 2000-2024
terms and conditions | privacy policy