Quote:
Originally Posted by davecymru
....Additionally to that and with the help of the nice chaps at Merlin Motorsport and the Triumph Owners Club forum, I've been doing a bit of research into the Vitesse Suspension as I'm not happy with how mine is sitting at the front and my local MOT men don't like chopped springs!
Here's an interesting read (with embedded charts) for anyone looking at altering their front suspension that shows you what std springs were fitted and advise for after-market spring rates:
http://club.triumph.org.uk/cgi-bin/f...?m-1294420747/
That shows us is the front spring rates and that the OEM ones are 2 3/4" internal diameter.
Now interestingly.... if you buy the height adjustable GAZ shocks from mssr's Rimmer, those were custom made for Rimmers with a 2 3/4" spring seat so you could fit the std springs!
I know this as the nice man at Merlin Motorsports rang them and asked for me 
But... most after-market lowering springs, including the ones i'd bought previously specifically for the Vitesse (although i can't remember where from) are 2 1/2" Internal Diameter!
So, If you alter the spring seats down to 2 1/2" (not too hard i've found!), or buy some 2 1/2" spring seats for your shocks then suddenly the world is your lobster!!
And if you talk to the nice man at Merlin, you can opt for just about any length and rate of 2 1/2" spring that you'd ever want and for not a lot of money at all!! 
https://www.merlinmotorsport.co.uk/s...ilover-springs
After my reading and measuring i have now ordered some 2 1/2" x 8" x 325lbs springs and we shall see what we shall see |
Hi,
I need to ask a question please? This is a quote from Dave Cymry's Miglia blog (I hope Dave that you still look at this forum now and then).
I will buy/part exchange the bottom spring seats, but I'm not sure what is the solution for the top plates that are on the original shocks, as they are used with the GAZ absorbers to fix them to the chassis.
Did you modify the original top spring plates in any way to fit the smaller diameter spring?
I know that I could buy springs from Rimmers, but they are longer and stiffer than the ones I would like to buy, and I would prefer not to cut the springs down.
Cheers, D.
Hybrid Mode
