Hi all
I have found my original invoice for my master cylinder, and I bought it off ebay!
Mine was for a Sierra, and does have a 22.2mm bore. However, these are becoming very difficult to source. The ebay seller has Cotina Mk4/5 which could just as easily be used with our adaptor plate.
I have checked with the seller, the projection towards the servo for the Cortina one is only 15mm, and has a diameter of 39mm, so is ideal. Even better for the BMW set up, is the fact that it has a 20.6mm bore, (which I believe one of you said was closer yto the original BMW?)
http://www.ebay.co.uk/itm/FORD-CORTI...item20c15fe003
And best of all they are less than £40 - while stocks last!!!!!!!!!!
Hopefully this has solved the last of your major problems - the rest are normal kit car problems!
Regards
Mike
Quote:
Originally Posted by Mike
Hi to BMW m/c users
John believes he can supply these at £53.00 +VAT = £63.60 +p&p. (I think this will be without the reservoir - but a standard original Sierra reservoir cleans up very well if required).
Has anyone found a lower cost source?
I thought I only paid around £40 for mine, but as I gave up saving invoices (due to the frigtening total cost of my car) I can not be sure.
|