Quote:
Originally Posted by oaktree11
I like the idea of the tube. One of my worries was that, because I dont have the bodywork, dash etc yet ("about" two months away from Marlin...) I am worried about making mods that might iterfere with what comes later!
|
Hi John,
if you look at this picture you'll see a white line across the top of the 'monocoque' .... it is a piece of masking tape.
The front edge of the tape was aligned to the front edge of the scuttle. It lines up with the front edge of the door pillars.
If you look closely you can see my pedal box top mounts which are two M8 bolts that sit behind the scuttle closure plate.
I didn't add any extra support to my pedal box but I think you can put an extra bar across it that point without hindering anything else, if you think you need too?
I hope that helps.... as 2 Marlin months can be quite a long time
Wiring loom by
marlinpeter, on Flickr