|
Mamba C23 Specification
Engine
Ford Duratec
Chassis
Fully-Triangulated Spaceframe
All joints Bronze Welded
Corrosion Resistant Powder Coating
Laser-Cut Brackets
1.2mm wall tubing
Alloy Panelled
Floor-Mounted Pedal Box
Bodywork
Hollow Fibre Composite Panels
Additional Front Ducting
Acrylic Wind Deflector
Alloy Fuel Tank
Composite Seats
Suspension
Independent Suspension
Double Unequal Length Wishbones
Coil-Over Alloy Dampers
Anti-Roll Bar (standard C23R)
All-Alloy Uprights
Minimising Unsprung Weight
10-tooth alloy cased Steering Rack
Braking
4 Pot All-Alloy Calipers
Vented & Drilled Front Disks
Drilled Rear Discs
Weight
520kg
Mamba C23R Specification
Engine Mamba Motorport DURATEC 230
Transmission AUDI 5-Speed High Torque Transaxle
Mamba Motorsport alloy adapter plate and race flywheel
Chassis Bronze Welded Spaceframe
Based on Lee Noble Design
Powder Coated
Fully Panelled (Bonded and Rivetted)
1.2mm Wall-thickness tubes
Suspension Double Unequal length wishbones
Coil-Over Alloy Shock Absorber
Front anti-roll bar
BodyWork 6 Piece Composite Bodywork
Based on Lotus 23 Moulds
Doors
Vented Front Panel
Cockpit Composite Driver and Passenger Seats
Floor Mounted Pedal Box
Right-Hand Gearshift
Instruments Integral Dash/Data Logger option available
Oil Pressure Gauge
Water Temperature Gauge
Oil Temperature Gauge
Wheels/Tyres Front - 13 x 7 Alloy
Rear - 13 x 8 Alloy
Yokohama A048 (as standard)
Brakes Front Caliper - 4-Pot Alloy
Rear Caliper - 4-Pot Alloy
Front Disc - 244mm Vented, Grooved and Cross-Drilled
Rear Disc - 253mm Solid, Grooved and Cross-Drilled
Dimensions Width - 1.70m
Length - 3.65m
Ground Clearance - 50mm
Dry Weight - 520 kg
Mamba C23R Specification
Engine Mamba Motorport DURATEC 180 / 200
Transmission AUDI 5-Speed High Torque Transaxle
Mamba Motorsport alloy adapter plate and race flywheel
Chassis Bronze Welded Spaceframe
Based on Lee Noble Design
Powder Coated
Fully Panelled (Bonded and Rivetted)
1.2mm Wall-thickness tubes
Suspension Double Unequal length wishbones
Coil-Over Alloy Shock Absorber
Front anti-roll bar
BodyWork 6 Piece Composite Bodywork
Based on Lotus 23 Moulds
Doors
Classic Front Panel
Cockpit Composite Driver and Passenger Seats
Floor Mounted Pedal Box
Right-Hand Gearshift
Handbrake Lever
Instruments Integral Dash/Data Logger option available
Oil Pressure Gauge
Water Temperature Gauge
Wheels/Tyres Front - 13 x 6 Alloy
Rear - 15 x 7 Alloy
Yokohama A048 (as standard)
Brakes Front Caliper - 4-Pot Alloy
Rear Caliper - 4-Pot Alloy with handbrake
Front Disc - 244mm Solid
Rear Disc - 253mm Solid
Rear Handbrake Mechanism
Dimensions Width - 1.70m
Length - 3.65m
Ground Clearance - 90 mm
Dry Weight - 540 kg
|
